12-Port Passive Poe Injector Panel
Informācija
30,10€
Bez nodokļa: 24,88€
Piegāde no piegādātāju noliktavām pirmssvētku periodā var nedaudz kavēties. Darām visu, kas mūsu spēkos, lai preces pie jums nonāktu laicīgi.
Prece ir pieejama
piegādātāja noliktavā
Piegādes laiks:
5-10 darba dienas
Pieejamais daudzums:
4 gab.
Šis produkta apraksts ir tulkots automātiski
Very appropriate solutions to power wireless devices, IP phones, IP cameras, etc. In case that powered device does not have a PoE extractor can be combined with passive POE splitter, see related documents.
The main advantages of this device are :
• 19" rack design
• LED control for visual monitoring of traffic
• outgoing ground component for surge filtering on the back panel
• reversible insurance against electric current fluctuation (OCP protection 650 mA) on each port
• Power input connector (2.5 mm jack center positive, 1 pcs included)
Instalation:
On the one side RJ-45 connector connects the Ethernet port, for instance switch (no power).
The other side (labeled PoE) is for UTP cables, which are connected to devices that feed at the same time.
Two unused pairs of the Ethernet cable are intended to supply the power. Power supply is kept in pairs 4,5 (+) and 7.8 (-).
| Port Speed | 100 Mb/s |
|---|---|
| PoE support | yes |
| 4G/LTE support | no |
| LAN | yes |
| Gigabit LAN | no |
| Indoor use | yes |
| 3G support | no |
| Certification mark | CE |
| Output voltage (V) | depending on used adapter |
| Wi-Fi | no |
| Outdoor use | no |
| Dimensions | 482,6 × 44,3 × 21,8 mm |
| SIM slot | no |
| Height (mm) | 44,3 |
| Width (mm) | 482,6 |
| Input Voltage (V) | 48 |
| RJ-45 | 12 |
| PoE-out | pasivní |
| Depth (mm) | 21,8 |
| Color | black |
| Manufacturer | XTENDLAN |
| Placement | rack |
| Standards | TIA/EIA 568 Cat.5 |