Victron BlueSolar-LCD&USB 30A PWM Solar Regulator
Victron BlueSolar PWM Charge Controller-LCD&USB 12/24 V
Illustrative photo - In the gallery is the 10 A version, which has different dimensions.
Solar PWM controller (12/24 V, rated charge current 30 A) with integrated LCD and USB. Suitable for small panels up to 360 Wp (720 Wp for 24 V). Its design is intended for small island solar systems. The advantage is very simple and easy installation and reliable operation.
- Solar panel(s) with 36 cells are recommended for charging a 12 V battery (max. current 30 A)
- For charging a 24 V battery, solar panel(s) with 72 cells or two 36-cell panels in series are recommended (max. current 30 A)
- With a 12 V battery, a maximum of 360 Wp panel(s) can be connected
- With a 24 V battery, a maximum of 720 Wp panel(s) can be connected
- Built-in clear LCD display for status monitoring and parameter setting
Liquid crystal display
For status monitoring and set-up
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.
The connect and disconnect voltages are adjustable.
Day/night timing of the load output
This option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithm
Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
Two 5 Volt USB outputs
Maximum current (both outputs combined): 2 A
Detailed technical information can be found in the attached datasheet and manual.
SPECIFICATIONS
Battery Voltage: 12/24 V (automatic system voltage detection)
Rated charge current: 30 A
Automatic load disconnect: yes
Charge voltage 'absorption': 14,4 / 28,8 V
Charge voltage 'float': 13,7 / 27,4 V
Low voltage load disconnect: 11,2 / 22,4 V
Low voltage load reconnect: 12,6 / 25,2 V
Protection class: IP20
Weight: 0.3 kg
Dimensions: 184 x 101 x 47 mm
| Max. operating temperature (°C) | 60 |
|---|---|
| Min. operating temperature (°C) | -35 |
| Manufacturer | VICTRON |
| Max. output voltage (V) | 30 |
| Zpracováno | Schváleno |
| Warranty period EU (months) | 60 |
| Technology | PWM |
| Height (mm) | 101 |
| Width (mm) | 184 |
| Depth (mm) | 47 |
| Rated Voltage (V) | 12/24 |
| Max. input voltage (V) | 28 |
| Max. input voltage (V) | 55 |
| Weight (kg) | 0,3 |
| Maximum Power (W) | 360 |
| Maximum Power (W) | 720 |
| Warranty period CRN (months) | 60 |