Paradox SP5500 panel, 2x5 zones, 2x PGM

The SPECTRA SP mixed type control panel is designed for small to medium applications. The control panel board provides 5, 8 or 16 inputs with the option to connect 10, 16 or 32 zones in ATZ wiring. Additional zones can be connected as key zones or wireless detectors with the MG-RTX3 receiver. The control panels can be divided into two subsystems and use 32 user codes to control the system. The control panels include a telephone communicator designed for communication to a PCO or to a civic telephone.

• Environment: indoor, -10 to +50 °C


• TestAlarm: 2-low/medium.

Features:

StayD switching: yes

Direct connection to PC via I307 interface: yes

Max. number of zones in the system: 32

Number of inputs (zones) on the control panel board: 5 (ATZ 10)

Number of zones on expanders (APR-ZX8): 24

Max. Number of keypads in the system: 15

Relay output on the control panel: no

Number of user codes: 32

Event history: 256

Max. Number of keypads in the system: 15

Max. bus length /total/: 230 m

Max. bus length to module: 75 m

Firmware: stored in EEPROM memory of the processor

Firmware change: yes, using InField software

Event history: 256

Event history display: BabyWare software, on the K32LCD EN keypad

Backup battery rechargeable current: 350/700 mA

Recommended backup battery: 12 V, 7 Ah/18 Ah

Optical signalling: LED CHARGE, STATUS

Hardware reset: yes, reset button

Recommended transformer type: 40 VA enclosed transformer

Recommended box type: BOX M-40, BOX S-40, BOX VZ-40

Number of inputs on control panel board: 5

Max. number of zones on control panel board: 10

Max. number of zones on keypads: 15 (one keypad - one zone)

Zoneexpander: yes, 8 zones one expander

Max. Number of zone expanders: 3

Bus detectors: no

Wireless zones: yes, 32, RTX3 receiver/transmitter

Types of zones programmed: 22

Dependent/intelligent zone definition: yes

Max. number of keyswitch inputs: 5, control panel inputs only

Max. Number of PGM outputs in the system: 16

Wireless PGM outputs: yes, 16, with RTX3 receiver

Number of subsystems: 2

Creating a dependent subsystem: no

Common zones for both subsystems: yes

Master code: 1 + 2

Maintenance code: 1

User codes: 30

Installation code: 1

User code length: 4 or 6-digit

System control options: user code, wireless key fob, keyswitch, remote over VDMP3 phone line

Automatic power-on: yes, based on time, system quiet

Power-on types: full, FORCE, STAY, SLEEP

StayD power-on: yes

Number of phone nu mbers on PCO: 2 + 1 bac kup

Num b er of phone numbers on PCO: 2 + 1 backup Number of phone numbers on PCO: 1 + 1 backup.





Ademco slow, Silent Knight fast, Sescoa, Ademco express, Ademco Contact ID, message to phone

Keypads: K10V/H, K32, K32LCD, K35, K37, K636, K32RF

Software: I307 - RS232/USB, modem - phone line, modem - ADP-1 simulator, IP150 - LAN/internet

Wireless receiver/transmitter type: RTX3

Number of wireless receivers in the system: 1

Wireless key fob control: yes

Number of key fobs in system: 32

Wireless detectors: yes

Wireless detector monitoring: yes

Monitoring interval: 80 minutes/24 hours

Max. Number of wireless detectors: 32

Range extension repeater: yes, RPT1

Max. number of signal repeaters: 2

Wireless PGM output: yes, type 2WPGM

Max. Number of wireless PGMs: 16

PGM output activation by key fob: yes, any PGM in the system

Number of PGM outputs on the receiver: 2x PGM max. 150 mA, 1x 5 A/28 V relay, (optional) 1x 5 A/28 V relay

Wireless keypads: yes, K32RF

Max. number of wireless keypads: 8

BASIC SPECIFICATIONS

Subdivision into subsystems: yes, 2

PGM outputs on control panel: 2x 50 mA transistor

Max. current consumption from AUX output: 1 A

AUX output type: electronic reversible fuse 1.1 A

Max. Current draw from BELL output: 2 A

Type of BELL output: electronic reversible fuse 3 A

Control panel current draw: 100 mA

Power supply: 16 VAC, 20/40 VA

Power supply type: switching