Victron SmartSolar 150/70 -tr v.can mppt solar regulator
Victron SmartSolar 150/70-Tr VE.Can MPPT
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronize SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronized with VE.Can, and up to 10 units with Bluetooth.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug in the display.
SPECIFICATIONS
Battery voltage: 12/24/48 V Auto Select (36 V: manual)
Rated charge current: 70 A
Nominal PV power, 12 V: 1000 W
Nominal PV power, 24 V: 2000 W
Nominal PV power, 36 V: 3000 W
Nominal PV power, 48 V: 4000 W
Maximum PV open circuit voltage:
150 V absolute maximum coldest conditions
145 V start-up and operating maximum
Max. PV short circuit current: 50 A
Maximum efficiency: 98 %
Weight: 3 kg
Dimensions: 250 x 185 x 95 mm
VictronConnect app:
The application can also be downloaded from the Victron Energy website:
https://www.victronenergy.com/support-and-downloads/software#victronconnect-app
| Max. operating temperature (°C) | 60 |
|---|---|
| Min. operating temperature (°C) | -30 |
| Manufacturer | VICTRON |
| Max. output voltage (V) | 70 |
| Zpracováno | Schváleno |
| Warranty period EU (months) | 60 |
| Technology | MPPT |
| Height (mm) | 95 |
| Width (mm) | 250 |
| Depth (mm) | 185 |
| Rated Voltage (V) | 12/24/36/48 |
| Weight (kg) | 3 |
| Maximum Power (W) | 4000 |
| Warranty period CRN (months) | 60 |